Standard deck
For boats with a swim platform
A 500 mm seating deck across the boat end. Step across from the swim platform and slide straight in.
- Suits cruisers, inboards and stern drives
- The largest swim area for each size
The Sea Pool
The Sea Pool: protected swimming, wherever you anchor
The Sea Pool is a portable swim enclosure designed for boats. A drop-stitch inflatable float carries a 500 mm seating deck at the boat end, with premium 2.1 mm steel-core netting hanging 2 metres down on every side and a full net floor underneath. It ties securely to your stern, inflates from the boat with a 12 V pump, and packs away with the net still attached. Available in 6 x 5, 5 x 4 and 4 x 4 m, all built to the same specification.
On the water
See the Sea Pool tied off
The Sea Pool in aqua, tied off the stern and ready to swim. Concept images: prototype photos are coming after sea trials.
Two deck options
Built for your boat
Choose the deck that suits your stern. The standard deck is made for boats with a swim platform. The outboard deck is designed for trailer boats, fitting around the transom and motor with extra room to sit back and relax. Both are available on every size and set up the same way.
Outboard deck
For trailer boats with an outboard
A 1,000 mm seating deck with a foam-lined 45° notch around a single outboard. The deck sits hard against the transom with twice the room to lounge, and the net hangs behind the notch, keeping the motor outside the pool.
- Notch 1.8 m wide at the transom and 600 mm deep
- Angled sides clear the motor through its steering range
- Fit confirmed against your boat before we build
The outboard deck reduces the swim length by about 500 mm. Twin outboards, auxiliary motors and transom ladders may need a custom layout. Engine off and kill cord removed before anyone swims. Concept images.
Trailer boats
Check your fit
Add your boat, length and outboard on the pre-order form, and we'll confirm the fit before your pool goes into production.
Colours
Pick your colour
Every Sea Pool comes in a choice of ten colours. The logo is printed in whichever version reads best on your colour.
Showing: Aqua. Colours on screen are a guide; final PVC colours are matched to the manufacturer's standard range. Custom colours on request.
Parts of the pool
- Seating deck. 500 mm wide and 150 mm thick, along the boat end, or 1,000 mm with a 45° motor notch on the outboard deck. Sit on its inside edge with your legs in the water. Non-slip top and 4 grab handles.
- Two fill points. One for the deck, one for the float. Both are at the boat-end corner, so you can pump up from the swim platform.
- Drink holders. Soft foam cups set flush into the deck just behind the seat line, and two in each far corner.
- Diagonal far corners. The far inside corners are cut on a 45 degree angle, so there's no square corner for a swimmer to get pinned in.
- Side beams. Flat-topped 130 x 90 mm drop-stitch with welded seams, stiff enough to hold the pool square and lean on.
- The net. Heavy-duty braided netting with a stainless wire core. It hangs square on its headrope from 316 stainless D-rings, with a leadline round the bottom, and lead-cored rope stitched in at key locations to help it hang square and hold its shape.
How it sits
No swimming under the deck
Along the deck, the net hangs from the deck's inside edge, not its middle. Swimmers can't get under the platform, and your legs hang inside the pool, in front of the net. A full net floor closes off the bottom, so the pool is netted on every side and underneath.
Sizes and specs
Three models
Every Sea Pool is a fully custom design, not an off-the-shelf inflatable. The float is engineered to our own drawings, and every net is hand made and hand slung in Port Lincoln from premium steel-core netting. That craftsmanship is what goes into the price, and it is why we build in limited batches. Every size comes with a choice of standard or outboard deck.
6 x 5 m
Flagship- Clear swim area
- 25.2 m²
- Seating deck
- 5.0 m, seats 3 adults
- Swimmers
- 6-8
- Drink holders
- 10
$6,499 RRP inc. GST
Early-bird pre-order $5,499
First 50 deposits only
5 x 4 m
Mid size- Clear swim area
- 16.1 m²
- Seating deck
- 4.0 m, seats 2 adults
- Swimmers
- 4-6
- Drink holders
- 8
$4,790 RRP inc. GST
Early-bird pre-order $3,990
First 50 deposits only
4 x 4 m
Compact- Clear swim area
- 12.4 m²
- Seating deck
- 4.0 m, seats 2 adults
- Swimmers
- 3-5
- Drink holders
- 8
$4,290 RRP inc. GST
Early-bird pre-order $3,490
First 50 deposits only
Made to order · limited each year
Sea Pool XL and custom builds
For bigger boats and bigger crews. Alongside the standard production run, we build a small number of XL and custom Sea Pools each year, one at a time in Port Lincoln. Build slots are limited and go in order of enquiry.
- Sea Pool XL, 8 x 6 m. About 42 m² of clear swim area, around 70% more than the 6 x 5. A 6 m seating deck that seats 4 adults, and room for 10 to 14 swimmers.
- Custom. Your length and width, a deeper net, a seating deck at both ends, or your own colours, built to suit your boat.
- Quoted individually. Price on application, with its own deposit and build timeline.
Net option
Shallow net, 1.0 m deep
Every size is also available with a 1.0 m net instead of the standard 2.0 m. It suits younger kids and shallower anchorages: you only need about 2.5 m of water under the pool instead of 3.5 m, and it's lighter to pack. Same full net floor and steel-core netting. Choose it on the pre-order form.
Optional extra · in development
Deterrent Pods
An optional add-on we're developing as an extra layer of reassurance on top of the steel-core net. We'll share the full details once our own testing is complete.
They'll only go on sale once our own testing is done, and we'll publish what that testing shows. Tick the box on the pre-order form if you're interested in adding a set to your Sea Pool. Price TBA.
Compare all three models side by side
| Spec | 6 x 5 m | 5 x 4 m | 4 x 4 m |
|---|---|---|---|
| Overall size | 6 x 5 m | 5 x 4 m | 4 x 4 m |
| Clear swim area | 5.37 x 4.74 m (25.2 m²) | 4.37 x 3.74 m (16.1 m²) | 3.37 x 3.74 m (12.4 m²) |
| Net depth | 2.0 m standard, or 1.0 m shallow option | 2.0 m standard, or 1.0 m shallow option | 2.0 m standard, or 1.0 m shallow option |
| Min. water depth | 3.5 m (2.5 m with the 1.0 m net) | 3.5 m (2.5 m with the 1.0 m net) | 3.5 m (2.5 m with the 1.0 m net) |
| Net floor | Full net floor | Full net floor | Full net floor |
| Seating deck | 500 mm x 5.0 m, 150 mm thick | 500 mm x 4.0 m, 150 mm thick | 500 mm x 4.0 m, 150 mm thick |
| Deck seats | 3 adults | 2 adults | 2 adults |
| Suits | 6-8 swimmers | 4-6 swimmers | 3-5 swimmers |
| Drink holders | 10 | 8 | 8 |
| Float weight (est.) | 24-30 kg | 20-25 kg | 18-22 kg |
| Net area | 68 m² (41 sides + 27 floor) | 51 m² (33 sides + 17 floor) | 43 m² (29 sides + 13 floor) |
| Price (RRP, inc. GST) | $6,499 | $4,790 | $4,290 |
| Early-bird pre-order | $5,499 | $3,990 | $3,490 |
Every model
- Drop-stitch PVC float with fully welded seams, 130 x 90 mm side beams
- Net: 2.1 mm steel-core netting, 80 mm square mesh, about 75 mm clear opening, hung square
- 316 stainless D-rings at 450 mm maximum spacing
- Choice of standard deck or outboard deck for trailer boats
- 2 tie-off rings and grab handles on the deck
- 2 fill points at the boat-end corner
- Rolls up with the net still clipped on, into one mesh bag
In the bag
What's included
Every Sea Pool arrives ready for the water, with everything you need to set up, swim and pack away.
- The Sea Pool floatDrop-stitch float with your choice of standard or outboard seating deck, drink holders, grab handles, ladder lugs and tie-off rings
- Premium steel-core netWalls and full net floor, already clipped on: 2.0 m standard or 1.0 m shallow
- Manual high-pressure pumpInflate straight out of the bag, no power needed
- Mesh storage bagHeavy-duty duffel that holds the rolled pool and drains on the way home
- Puncture repair kitPVC patches, adhesive and valve tool in a zip case for the boat
- Rope boarding ladderThree non-slip treads, clips to the deck lugs for an easy climb out
- Owner's manualSet-up, safety, care and warranty in one guide
Optional extras such as the electric pump kit, tie-off kit and stinger liner are on the accessories page.
Build specification
Float and net, in detail
Every Sea Pool net is designed in Port Lincoln to suit your pool size, boat and crew. We source premium steel-core netting in bulk, and each net is then cut, stitched and hand slung here by experienced net makers. The float and seating deck are engineered by our team and built to our drawings by a trusted specialist manufacturer. Every Sea Pool is then fitted, inspected and finished to our own safety standards in Port Lincoln before it is delivered.
Show full float and net specifications
| Construction | Drop-stitch, 0.9 mm PVC skins, fusion (machine) laminated |
|---|---|
| Seams | Fully welded, hot-air or HF. No glued seams |
| Side beams | 130 x 90 mm, flat top, rounded edges |
| Seating deck | Standard: 500 x 150 mm along the boat end. Outboard deck: 1,000 x 150 mm with a foam-lined 45° motor notch. Non-slip top |
| Chambers | 2 separate: seating deck and float ring |
| Fill points | 2 valves side by side at the boat-end corner |
| Corners | Rounded outer corners, 45° inside corners at the far end |
| Net attachment | 316 stainless 25 mm D-rings on welded underside patches, 450 mm max spacing, in line with the float |
| Deck fittings | 4 grab handles, 2 stainless tie-off rings, flush foam drink holders |
| Factory testing | Every float pressure-held for 24 hours and over-pressure tested before it ships |
| Colour | 10 standard colours, logo printed. Custom on request |
| Netting | 2.1 mm braided steel-core predator netting, with a single-strand 0.6 mm stainless core |
|---|---|
| Mesh | 80 mm square, knot to knot (about 75 mm clear opening) |
| Mesh strength | 120 kg minimum breaking strength per mesh (ISO 1806 test) |
| Wall depth | 2.0 m, hung square |
| Floor | Full net floor, stitched to the walls all round: one piece |
| Net area | 68 m² (6 x 5), 51 m² (5 x 4), 43 m² (4 x 4), floor included |
| Top edge | Laced to a continuous headrope, clipped to the float D-rings |
| Lead line | Bound into the floor seam all round, no loose droppers |
| Lead-cored rope | Stitched in at key locations so the net sits down and holds its shape |
| Net weight | About 7.6 kg (6 x 5), 5.7 kg (5 x 4) and 4.8 kg (4 x 4) with the 2.0 m net, before the lead line |
| Corner rings | 316 stainless ring at each bottom corner, for clip-on weights in current |
| Made | Stitched and hung by hand in Port Lincoln |
| Packing | Stays clipped to the float and rolls up with it |
Design figures from our production drawings. Final figures are confirmed in prototype trials before the first production run.
Gallery
More views
Concept images of the Sea Pool at anchor around the coast. Real photos will replace these concept images after final sea trials have been completed.
Which size suits you?
Tell us your boat and your crew when you join the list, and we'll help you pick.